Argox OS-2130D Manual do Utilizador descarregar pdf (Página 35)

OS-2130D & OS-2130DE User’s Manual

4. Remove the whole print head assembly by releasing 4 screws at its

feet.

Figure 6.3

5. Add a cutter baby board to J5 on the main board.

6. Secure three attached screws for the cutter.

Figure 6.4

OS-2130D & OS-2130DE User’s Manual

7. Plug the cutter's connector into the PCB's header connector (J3).

8. Reinstate the print head assembly by securing back the 4 screws.

9. Click back the middle cover.

10. Secure two screws back at base housing.

11. Install the top cover.

1 2 ... 30 31 32 33 34 35 36 37

Sem comentários

Argox OS-2130D Manual do Utilizador Página 35