Argox CP-3140E Manual do Utilizador descarregar pdf (Página 23)

Compact Printer Series - User’s Manual

Serial (RS-232) Interface Requirements

The required cable must have a nine-pin "D" type male

connector on one end, which is plugged into the mating serial

port located on the back of the printer. The other end of the

signal interface cable connects to a serial port on the host

computer.

Parallel Interface Requirements

The required cable (IEEE 1284-compliant is recommended)

must have a standard 36-pin parallel connector on one end,

which is plugged into the parallel port located on the back of the

printer. The other end of the parallel interface cable connects to

the printer connector at the host computer. For pin-out

information, refer to the Reference Technical Information,

Interface Specification.

Serial and Parallel Cabling Requirements

Data cables must be of fully shielded construction and fitted with

metal or metalized connector shells. Shielded cables and

connectors are required to prevent radiation and reception of

electrical noise.

To minimize electrical noise pickup in the cable:

1. Keep data cables as short as possible.

(6 ft or 1.83m recommended)

2. Do not tightly bundle the data cables with power cords.

Note:

For technical and pin-out information, please refer to the Technical

Reference, Interface Specifications in this manual.

Compact Printer Series - User’s Manual

3. Do not tie the data cables to power wire conduits.

Ethernet 10/100 Internal Printer Server Option

This connector is for Ethernet application; it is convenient to use

several printers by Ethernet connector at the same time.

Ethernet Module Status Indicators

LED Status Description

Both Off

No Ethernet link detected.

Blinking

The printer waits for printer ready.

It will take about 20 seconds to be ready.

Green

Speed LED

On: 100 Mbps link

Off: 10 Mbps link

Amber

Link/Activity LED

On: link up

Off: link down

Flash: activity

Ethernet LED Indicators:

Note:

When using Ethernet model printer, please wait till the Ready

Indicator to stop blinking, before starting printer operations.

Amber LED

Green LED

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Comentários a estes Manuais

Sem comentários

Argox CP-3140E Manual do Utilizador Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir Argox CP-3140E