Argox PT-10 Manual do Utilizador descarregar pdf (Página 22)

4. Operation of the Collector

4.1 Software Description

The functionality of the collector is determined by software, e.g. user application that

is running on the collector.

Usually, the collector is not equipped with software. There are only some simple

functions can be tested (like scanning test, com port test). So at the first use, the user

application (an example provided in ArgoBuilder) must be loaded into collector.

Tools provided by Argox for developing a user application are:

 ArgoBuilder; application generator

 Software Development Kit (SDK); ARM code, C compiler and C library for

handheld collector

The user application must be downloaded from the PC into the collector. You can use

the cradle or an RS-232 cable for communication between the collector and the PC. A

program (ArgoLink) on the PC will send the user application to the collector, where it

is stored in Flash ROM (program made by ArgoBuilder or SDK) or SRAM (program

made by ArgoBuilder).

”ArgoBuilder” and “ArgoLink” will detailed explain in separate manual.

When the functionality of the collector is defined by the application, it is ready for

operation.

In a typical application, you will press the trigger key and scan a bar code label as

described in the next paragraph. Scanned data and data entered from the keypad are

stored in the collector’s RAM. The user application can use this data in subsequent

steps.

The collected data can be transmitted to the PC further processing through the cradle or

the RS-232 cable.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

Sem comentários

Argox PT-10 Manual do Utilizador Página 22