Argox PT-10 Manual do Utilizador descarregar pdf (Página 30)

For example, if you want to get an “H”, just continuously press key

TWICE under Alpha Mode and you will get “H” after about 0.5 second.

 During data input, the cursor can be moved up, down, left and right as you

desired according to the field length limit. If you want to input a “SPACE”, just

simply press

to move the cursor right.

 If you press the Cancel Key

, you will delete the data placed before the

cursor.

4.4.2 Remote Link

Function

 If the collector is idle for a long time, it will be turned of by Auto-off function.

And it will be turned on again by manually power on or enabled through

ArgoLink.

 Currently data files (.DAT), program files (.ABP), and Fonts file (.CFT) can be

uploaded to PC. The other file formats can only be downloaded and deleted.

 If you want to exit this function, just simply press ESC key

Equipment Required

 A communication cable (RS-232) or a CRD-10 cradle

 ArgoLink software

Settings

 You can select the communication interface at Setting\BIOS Setting\Interface.

You can select serial port (RS-232) or USB port (only available for CRD-10).

The default setting is serial port (RS-232).

 You can set up the collector output Baud Rate at Setting\BIOS Setting\Baud

Rate. The default value is 115200 bps. The other serial port parameters can not

be changed:

Data Bit: 8

Parity: None

Stop Bit: 1

Flow Control: RTS/CTS

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

Sem comentários

Argox PT-10 Manual do Utilizador Página 30